Solar energy refers to the conversion of sunlight or thermal radiation from the sun into usable electricity or heat. This renewable resource relies on mature technologies that are accessible to both individuals and professionals. Understanding its basic mechanisms and recent regulatory developments allows for the sizing of a realistic project and helps avoid several common pitfalls.
Solar self-consumption: why the timing of consumption matters more than the volume produced
Most guides on solar energy emphasize installed power or the number of panels. In practice, profitability mainly depends on when the electricity is consumed. A kilowatt-hour produced and used in real-time avoids a purchase from the grid, while a surplus kilowatt-hour sold back yields significantly less.
Scheduling the water heater, washing machine, or charging an electric vehicle during sunlight hours increases the share of self-consumption. This shift in usage, sometimes referred to as load management, does not necessarily require a storage battery. A simple timer or solar router is sufficient in many cases.
The Solar Energy Guide details these management strategies to align consumption with daily production rhythms.

Photovoltaic panels and solar thermal: two technologies, two uses
The term “solar panel” encompasses two distinct families that must be differentiated before any purchase.
Photovoltaic generates electricity
A photovoltaic panel captures sunlight using silicon cells. When photons strike these cells, they release electrons and generate direct current. An inverter then converts this current into alternating current, compatible with the home grid.
The efficiency of a panel depends on the roof’s orientation, tilt, shading, and the chosen technology (monocrystalline, polycrystalline). Monocrystalline panels offer better efficiency per square meter, making them suitable for roofs with limited surface area.
Solar thermal generates heat
Thermal collectors heat a heat transfer fluid using solar radiation. This fluid then feeds into a hot water tank or underfloor heating system. Thermal technology has nothing to do with electricity production: it replaces or complements a boiler.
There are also hybrid panels that combine photovoltaic and thermal technologies in a single module. The cooling of the cells by the heat transfer fluid improves electrical efficiency while producing heat.
Tariff decree of June 2026: what changes for new solar installations
The French regulatory framework has significantly evolved. The tariff decree of June 1, 2026, has removed the self-consumption bonus for new connection requests concerned. The conditions for compensation for surplus injected into the grid have also been modified.
Projects submitted before this date retain the old contractual conditions. For any new installation, it is necessary to check the official text and the conditions applicable to the file. This distinction between old and new contracts radically changes the profitability calculation.
This tightening pushes project holders towards a logic of maximum self-consumption rather than resale. Sizing adjusted to the actual needs of the household becomes even more crucial than before.
Reduced VAT and local aids: actual eligibility conditions for residential solar
The reduced VAT rate of 5.5% applies under certain conditions to some small residential photovoltaic installations. This rate is not automatic: it depends on the system’s power, the type of housing, and the age of the building. Installations exceeding a certain power threshold are subject to the normal rate.
On the local aid side, several regions and municipalities offer complementary subsidies. Their amounts and criteria vary greatly from one territory to another.
- Check the eligible power for the reduced VAT rate before signing a quote, as the threshold excludes larger installations
- Consult the schemes of your municipality and region, which can be combined with national aids under certain conditions
- Ensure that the installer is RGE certified (Recognized Environmental Guarantee), a condition often required to access public aids
- Distinguish the aids related to the date of the complete connection request from those related to the installation date, as the timelines differ
Sizing your solar installation: technical criteria to check before any quote
Before contacting an installer, several parameters determine the feasibility and size of the project.
- The orientation and tilt of the roof: a south-facing exposure with a slope of around 30 degrees offers the best capture in mainland France, but east or west orientations remain viable
- Solar masks: chimneys, trees, neighboring buildings that cast shade reduce production in ways that are sometimes underestimated
- The household’s consumption profile: an oversized system generates poorly compensated surplus, especially since the June 2026 reform
A preliminary energy assessment, conducted based on the electricity bills from the past twelve months, allows for estimating the necessary power. Serious installers offer a feasibility study including a shading simulation and an annual production projection.

Connection to the electrical grid goes through Enedis (or the local distribution company). The connection request also triggers the purchase obligation contract if the project plans to sell surplus. It is the date of the complete connection request that determines the applicable tariff conditions, not the date of panel installation.
A well-calibrated residential solar project thus starts with the consumption profile, goes through regulatory verification, and ends with the choice of an RGE installer. Skipping any of these steps exposes one to disappointing returns on investment or the loss of aids that the household could have claimed.




